Name: WaterPro PS Polishing Systems
SKU: MP-WaterPro-PS-Polishing-Systems

Products
Industries
Resources
Service & Support
Company
Contact Us
Account

Products Industries Resources Service & Support Company Contact Us

Request Quote

WaterPro PS Polishing Systems

Products
/
Washers & Water Purification
/
Water Purification Systems
/
WaterPro PS Polishing Systems

Master product

WaterPro PS Polishing Systems

Talk to an Expert Resources

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.

Features

• Timed dispense for unattended operation
• Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
• Attractive and corrosion-resistant Type 304 stainless steel front panel
• Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water.
• Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point.
• Built-in dispensing center
• Quiet 1/4 hp motor and rotary vane recirculation pump
• Dispensing valve
• Wall mountable
• TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models).
• UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models).
• ETL listed (115 volt models)
• CE Conformity (230 volt models

Options

• Dispensing gun
• International electrical configurations

Required Accessories

• Polishing Kit

Optional Accessories

• Activated Carbon Cartridge
• Deionization Cartridge
• Organic Adsorption Cartridge
• Replacement Ultrafilter
• Replacement UV Lamp
• Hollow Fiber Final Filter
• Filling Bell
• WaterPro RO/PS Mobile Stand
• Support Stand
• Conversion Kits

CA Prop 65 Warning ➔

Power Cord & Plug

British (UK)

India

Schuko

None

North America, 115 Volts, 15 Amps

North America, 230 Volts

Water Purity Desired

Pyrogen-free

Type I, TOC < 10 Ppb

Type I, TOC < 5 Ppb

Region

International

U.S. and Canada

Need help with this selection?

Talk to an Expert ➔

Talk to an Expert

Application Specialists

Jenny Sprung

Product Service

Dillon Joeckel

Sales contacts Project assistance

Looking for some other kind of information? Contact us ➔

Videos

Related products

WaterPro Interconnect Kit

The Interconnect Kit includes the necessary hardware and tubing to install a WaterPro RO Station or 70 Liter Storage Tank to a glassware washer. This kit may be used with any SteamScrubber or...

View Product

WaterPro RO and PS Electrical Connection Cord

WaterPro RO/PS 125/230 volt, 10 amp Electrical Connection Cord. Three wire cord with plug on both ends allows electrical connection between the left side of the WaterPro RO Station and the right side...

View Product