Cell Logic Class II, Type A2 Biosafety Cabinets

Features (All Models)

• Long-life DC Electronically Commutated Motor (ECM)
• Constant Airflow Profile™ (CAP) airflow monitoring system
• BalanceFlow™ plenum provides energy-efficiency and ultra-quiet operation*
• Easy clean top cover that promotes even exhaust airflow from the top cover
• Mag-Zone™ area on interior right side manages storage challenges with Labconco Magnetic Mag-Zone accessories
• Intrinsically-safe negative pressure design
• Fully scannable 99.99+% supply and exhaust HEPA filters. 99.999% efficient ULPA filters or H14 HEPA filters also available
• Logic OS and 5" interior-mounted, line-of-sight touchscreen information center
  • Smart-Start™ System allows user to start up and shut down cabinet functions by raising and lowering the sash
  • Night-Smart™ System for idling the blower when the sash is fully closed
  • Full operational maintenance and certification logs for detailed record keeping
  • Status line for alarm conditions and alerts to warn when filter life diminishes to 20% and 10% before alarming at 0%
  • Interval/elapsed timer for experiment monitoring
  • UV light timer (on models with UV)
  • Password protection for cabinet settings
  • 8 Languages
• Bright, glare-free LED lighting up to 180 foot-candles (1937 lux). Located outside the contaminated work area
• Curved, stainless steel inlet grille with waterfall design and Reserve-Air™ Secondary Airflow Slots
• Air-Wave™ Entry System at access opening to enhance containment
• Contain-Air™ Negative Pressure Channel at top of sash to enhance containment
• Two electrical outlets. Flush mounted stainless steel cover with dampened hinges
• 115V GFCI, double receptacles, maximum amperage draw 5A
• 230V, single receptacles, maximum amperage draw 3A
• 10° angled, fully closing sash. 1/4" tempered safety glass with counterbalanced, anti-racking, easy-to-lift mechanism
• Unitized, pressure tested stainless steel interior. Optic White epoxy-coated steel exterior
• Removable towel catch located under work surface
• 8", 10", or 12" (20.3, 25.4, or 30.5 cm) working sash height
• 22.5" (57 cm) max. sash opening & 27.0" (69 cm) viewing height
• Removable, seamless type 304 stainless steel, dished work surface with lift out knobs
• Nominal inflow velocity of 105 fpm (0.53 m/sec)
• Nominal downflow velocity of 55 fpm (0.28 m/sec). 6' x 12" sash models nominal downflow velocity of 50 fpm (0.25 m/s)
• Approximately 70% air recirculation
• Noise level <60 dB (4ft 10" model)
• 10' (3 m) power cord with plug
• Six year warranty

Options

• 3’, 4’, 5’ and 6’ widths
• International electrical configurations
• Unassembled, NSF-approved, epoxy-coated steel, non-welded telescoping base stand with leveling feet
• Accessory Package
  • UV lamp (254 nm)
  • Right-side service fixture with ball-type valve
  • Right and left-side Vacu-Pass™ Cord & Cable Portal
• Ventus II Canopy Connection
• Cell Logic Packages
  • Scope-Ready™ Package consisting of 7.0" wide x 10.5" high (18 x 27 cm) sash cutout and Pure-Vu™ Seal with powder-coated steel collar. Stand-Still™ Isolation Platform is required and sold separately.
  • Temp-Zone™ Package consisting of temperature-controlled work area, 10.5" wide x 12.0" deep (27 x 30 cm) located on the left side of the work surface. Water circulator is required (not included). Circulator requirements: minimum flow rate of 0.4-0.5 GPM (1.5-1.9 LPM), typical volume of 6 liters, and temperature of 0-50° C (chiller/heater).

Required Accessories (Not Included)

• Supporting base if non-welded stand option is not selected

Compliance

• NSF/ANSI Standard 49 listed
• NSF/ANSI 49 compliant (Cell Logic models)
• ISO Class 5 (Grade A) per ISO 14644-1
• UL Standard 61010-1
• CAN/CSA 22.2 No. 61010-1
• CE/UKCA Mark (230V models)
• ADA-compliant